Skip to content
CorrectiveActionReport.comSupplier CAR Response Desk — home

Fees, Scorecards & Recurrence

Supplier Quality Manual Fees for Nonconformance: Finding and Logging Them

Fee terms are often read once during onboarding and forgotten. This guide shows how to find them in your own customers' manuals and keep them where your team will see them.

Rovaryn Digital · · 6 min read

The fee clause nobody remembered

"We got one of these before. Is there a charge for this?" Someone asks that question almost every time a customer rejects a lot, and often nobody is sure. The supplier manual was read during onboarding, a couple of years ago, by an engineer who has since moved on. The PDF sits in a shared folder, and you cannot say whether it is the current revision.

This situation is common, and the fix is less about the fee itself than about where the information lives. Fee terms sit inside each customer's supplier quality manual or customer-specific requirements (CSRs), and they differ from one customer to the next. If nobody has pulled them into one place, the team learns about a charge when the debit memo reaches accounts payable.

This article shows how to find fee terms in your own customers' manuals, what to record about each one, and how to keep the record where your team will actually see it.

Why fee terms vary from one customer to the next

No single industry schedule applies to every customer. Each customer writes its own rules, and the rules change between manual revisions. A few dated examples show how the terms can differ, and none of them is a current requirement.

Adient's Global Supplier Standards Manual – Quality, published in 2021, said Supplier Material Rejection Reports were subject to a "not to exceed" US$250 administrative fee (or €250 in Europe). The same manual said that plants on its newer complaint system would calculate the fee from the complexity of the issue. Adient's 2021 manual is one dated snapshot; manuals are revised over time, so check the current revision for the terms that apply to you.

Fisher Dynamics' 2021 Supplier Manual (Revision 8) described a different structure. It listed an administrative charge for each Problem Report issued and a late-response fee that could be issued multiple times if the supplier stayed unresponsive. Its 2019 manual (Revision 6) had said that late or missing responses to Problem Reports may result in a weekly late fee. Both revisions described the late-response fee as weekly and able to be issued more than once. What changed between them was the charge per report.

Three things follow from these examples:

  • Fee structures differ. In the dated examples above, both manuals set a charge per report, and one also set a weekly late-response fee that could be issued more than once. Check whether your own customers' manuals mention fees at all.
  • Terms are revised, so the copy in your folder may be out of date.
  • Conditions can be written as "may" or "not to exceed," which matters for how you log them.

Read your current revision to see what applies to you. For a wider look at how deadlines vary, see response time requirements by customer.

Where to look in the manual

Fee language rarely sits under a heading called "Fees." Start with the supplier quality manual and any CSRs, since customer-specific requirements often carry terms that the general manual does not. Then work through this checklist.

  1. Search the table of contents for "nonconformance," "rejection," "problem report," "corrective action," "supplier performance," and "charge."
  2. Search the PDF text for "administrative," "fee," "charge," "cost recovery," "debit," "chargeback," "late," and "escalation."
  3. Check the appendices and forms. Fee schedules are often placed there, away from the main text.
  4. Read the supplier performance or scorecard section. Escalation steps, such as controlled shipping or a new-business hold, are often listed alongside charges.
  5. Look for a cost-recovery clause. This may cover sorting, rework, line stoppage or field costs, which are separate from administrative fees.
  6. Check purchase order terms and quality agreements. Some charges are set there instead of in the manual.
  7. Note the revision, date and where you downloaded it. If the customer's portal hosts the latest manual, confirm yours matches.

If a clause is unclear, ask your customer's supplier quality engineer (SQE) or buyer to confirm how it applies. The goal is to read the terms, not to guess at them.

What to log for each customer

A fee summary is only useful if it is specific. For each customer, capture the following fields:

Field What to record
Customer and document Manual or CSR name, revision, date, and the page or section
Trigger What starts the charge: a report issued, a missed response, repeat issues
Charge type Administrative fee, late-response fee, cost recovery, other
Amount or formula Exactly as written, with any qualifier such as "up to" or "may"
Repeat rule Whether it can recur per week, per report, or per occurrence
Response windows The containment and plan deadlines the fee relates to
Escalation steps Scorecard impact, controlled shipping, business hold
Who to ask The SQE or buyer to confirm questionable terms
Last checked Date someone confirmed this is still the current revision

Keep the wording close to the original and preserve qualifiers. "May result in" is not the same as "will be charged," and a summary that drops the difference can mislead the next person.

Record what the document says, not what you assume it means. If a clause is ambiguous, log the clause and a note that you have asked the customer to confirm.

Keeping it where the team will see it

A fee summary buried in a shared drive repeats the original problem. A few habits help.

  • Put one summary per customer on a single page. An engineer handling a new rejection should find the terms in under a minute.
  • Link it from the request record. Whether you use a spreadsheet, a tracker or software, the fee terms should be one click from each open request for that customer.
  • Assign a review date. Manuals are revised, so schedule a check of each customer's current revision at least when a new request arrives from them.
  • Log the actual charge when it lands. When a debit memo or invoice arrives, record the date, amount and the clause behind it. Understanding why a debit memo arrived is easier when the clause is already on file.
  • Separate administrative fees from cost recovery. The first is a stated charge for handling a report. The second is usually tied to the actual cost of the problem. Both belong in the log, but they are different things. The broader picture is covered in supplier chargebacks in quality, and the wider cost context in calculating cost of poor quality.

A fee summary kept in a spreadsheet or document works for a few customers. It gets harder as the list grows and as engineers change.

How a supplier-side record can hold this

A supplier-side record can keep fee terms next to each request instead of in a separate folder. Supplier CAR Response Desk is designed to do this. It is built to let you enter the fee terms you read from each customer's manual and attach them to that customer's rules. Its fee-exposure view, planned for the Professional tier and above, is designed to calculate from the terms you enter. It does not know any customer's fees, and it records and calculates; it is not advice or certification.

The Response Desk is not live yet. It is designed to work alongside each customer's portal, and your own record stays yours across all of your customers. Pricing is one flat price per plant rather than per seat.

Where to start

Pick the customer that sends you the most requests. Find the current revision of its manual, work through the checklist above, and fill in the table for that customer. Then repeat for the next one. The first customer takes the longest.

To hear when the Response Desk opens, join the waitlist.

Put it to work

Compare plans on the pricing page.

Get the next guide

Practical guides for supplier quality teams, delivered straight to your inbox.